How to set up the Shootsta Mini Kit 3

Learn how to set up the Shootsta Mini Kit 3.

 How to set up the Mini Kit 3 using the gimbal

1. Grab the Movi Cinema Robot gimbal and iPhone 11 from the Mini Kit.

2. Open the clamp on the Movi Cinema Robot gimbal and place the phone inside. Slide the phone back and forth until it’s balanced.

3. Grab the Rode Wireless GO transmitter from the Mini Kit. Open the clip and slide the transmitter onto the cold shoe on top of the Movi Cinema Robot gimbal's handle.

4. Grab the red coiled cable out from the Mini Kit and plug the black end into the receiver.

5. Take out the Apple adaptor and insert it into the grey end of the cable. Then insert the adaptor into the iPhone.

6. Unlock the iPhone 11. The password is printed on the back of the iPhone.

7. Open the Movi app on the iPhone.

8. Hold the power button down to turn on the Movi Cinema Robot gimbal.

9. Hold the power button down on both the Rode Go transmitter and receiver.

How to set up the Shootsta Mini Kit 3 (Tripod Setup)

1. Take the tripod and ball head out of the kit.

2. Screw the ball head onto the tripod.

3. Take the phone clamp out of the kit.

4. Twist the cold shoe to open the phone clamp.

5. Place the base of the phone clamp inside the tripod head.

6. Twist the nob to lock in place.

7. Place the phone inside the clamp.

8. Twist the cold shoe to tighten.

9. Slide the Rode GO receiver onto the cold shoe.

10. Plug in the red coiled cable and dongle to capture audio.

To change the angle of the tripod, twist the locking nob to loosen the ball head.
Once you’re happy with the angle, twist again to tighten.

Need help or have questions? Get in touch. We'd love to help!
​